Set-Up Wheel Blocks

suoits 3/32"

PSC 2101

All NEW REDESIGNED Set-Up Wheel Blocks.

Now available for .062 , .050 , .032 clearances.
Select the size tires you are going to run.
Grind out the rear axle uprights (pillow blocks) until the chassis lays flat on your Precision Slot Car Chassis Fixture.
Solder in the oilites. Sets the rear clearance .010 higher than tire size so you can practice and break in the tires and still make tech.
If your car handles better after the first few heats then you need these blocks to set the clearance.

If your car is sitting higher in the back than another racers car you are giving them an advantage.

The lower to the track your car sits the better it will handle. Made from 1/2" Corian.