ProSlot Euro MK1 Motor PS 4002FK

$36.10

Product may vary slightly from image representation.
ProSlot Euro MK1 Motor

PS 4002FK

This motor is based on our FK-MK1 series of motors and features poly/neo magnets,
65 turns of 30 gauge wire, 15 deg timing,
with clockwise rotation from the can side.
The shafts are long enough for Comm Coolers and endbell drive if desired.

The enbells are glued on, the tabs are crimped,
they are drilled and tapped, screws installed can to endbell and our SpeedFX seals are used.
These are the same specs as the current FK motors offered by other companies in this market place.

Proslot recommends gearing the PS-4002FK
with a overall gear ratio of
3.25 to 3.75 or to a "roll out" ratio of 4.25 to 4.50

Manufacturers