PI 419

1/32 car without body
for club racing and high level scale competition.
The brass 2 piece chassis features 3 positions for fronts and wheel base adjustments, 3 pairs of body mount holes.

Features Super 16 Motor #502

with 11T x 64 pitch pinion #527,
38T slot sproket #70106
and 3/32" rear axle
with .790" Dia x .790 Wide Rear Tires #678.
The rear axle measures 1-7/8" wide, it is only available in RTR or Chassis Kit.
If using this information to build a car, you would need 3/32" drill blank axle #633 and cut down to 1-7/8" wide.

You can use other motors, for example: #458 Home Set for 12V transformer power, etc.