Tire "Weegies"

PMTR 1036

help to solve the complex issue of tyre fit to the non-standard rims that exist on today's 1/32 slot racing cars.

These "Weegie" O rings widen the center raised portion of the rims and help to hold the tyre in place when it is subject to lateral forces when cornering.

Multiple "weegies" can be used if necessary to make up the disparity between the wheel & tyre which allows for a very wide range of tyres to fit a wheel.

"Weegies" work well with BOTH rubber tyres and silicone tires.
If multiple "weegies" are used on a single rim glue them in place with epoxy or superglue before the tyre is installed.

All 'weegies" are 0.040" (1mm) cross section & are available in the following sizes :

PMTR1035 - Small Hub "Weegies" for F1 type hubs - 8 weegies/package

PMTR1036 - Large Hub "Weegies" for non F1 (larger) type hubs - 8 weegies/package