Alclad II Chrome For Lexan
ALC-114
APPLICATION GUIDE-POLYCARBONATE/LEXAN BODY SHELLS:
The surface must be thoroughly cleaned
remove release agent,adhesive residue and finger marks.
Regular ALCLAD -apply 2-3 light coats at 15-20 psi-back with any R/C paint.
High Shine Alclad-apply 2-3 light coats at 15-20 psi,large areas can be backed with water based black or silver paint.
Application Directions:
Shake well before use.
Thoroughly clean surfaces.
Remove Adhesive Residue, Release Agent & Fingerprints.
Spray light coats at 15 - 20 psi.
Back ALCLAD II with any dark color.
Clean with lacquer thinners.
